Wet Dungeon Floors
This set of 3D-printable STL terrain brings watery pools and streams to dungeon layouts. It includes two styles of wet dungeons¸ one with a brick edge and another with a rougher natural edge. The plain water tile that matches the water texture used in this set can be found in FDG Dungeon Hazards & Traps. Sample layouts in each style: Recommended Print Settings: Layer Size : 0.15mm¸ or 0.1mm for finer detail Infill : 10% for all models recommended¸ especially thin posts and door frames Top/Bottom Layers : 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count : 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports : none for most pieces; brim may be helpful for T roof if there are any adhesion issues Related Sets: Wet Dungeon Floors -- this set Wet Dungeon Walls -- wet dungeon floors with adjacent walls¸ posts¸ and corners Wet Dungeon Walls 2: Brick -- more wall and post combinations¸ wet ruined walls¸ and more Wet Dungeon Walls 2: Natural -- more wall and post combinations¸ wet ruined walls¸ and more Wet Dungeon Exits -- water flowing through doors¸ arches¸ cracked walls¸ and more