Skeletons Set 1
DRAGONLOCK™ Miniatures are hyper-detailed sculpts specifically designed to print on a 3D printer with NO SUPPORTS! See the photos below showing the high quality results these sculpts will produce¸ including a sample image of a mini with no cleanup straight from the print bed. Best of all¸ a standard 28mm mini costs UNDER TEN CENTS to print. Become your own miniature manufacturer today!
Actual prints¸.25mm nozzle¸ no supports used¸ minor cleanup (less than 1 minute per miniature):
Sample prints straight from printer with no supports and NO CLEANUP!
Suggested print settings (for best results print one miniture at a time):
.25mm Nozzle (Hatchbox PLA or eSUN PLA Pro recommended)
Temperature: 190°
Layer height:.08mm (.05mm to.1mm will work as well)
First Layer:.2mm
Perimeters: 4
Solid top layers: 15
Solid bottom layers: 10
Infill: 10% grid
No supports
Speed: 20mm/sec (15mm external perimeters)
NO 'Z HOP'
.4mm Nozzle (Hatchbox PLA or eSUN PLA Pro recommended)
Temperature: 190°
Layer height:.08mm (.05mm to.1mm will work as well)
First Layer:.2mm
Perimeters: 3
Solid top layers: 10
Solid bottom layers: 10
Infill: 10% grid
No supports
Speed: 20mm/sec (15mm external perimeters¸)
NO 'Z HOP'